manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 118 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 118

Installing a new G700 with an S8300 using the Avaya Installation Wizard

118 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Checking for and FTP/SCP/SFTP Server or Compact Flash for Backing up
Data

During the installation and upgrade procedures, you must back up the system data to an FTP, 
SFTP, or SCP server, or to the USB Compact Flash drive. You use a server on the customer’s 
LAN for backups. 

●

Check with your project manager or the customer for the following information about the 
FTP, SFTP, or SCP server.

- Login ID and password

- IP address

- Directory path on the FTP/SFTP/SCP server 

!

Important:

Important:

Before going to the customer site, make sure that you can use either a customer 
server for backups or a compact flash card. 

Obtaining service pack files, if needed

If one or more service packs are required for this installation or upgrade procedure, and the 
service pack files are not on your software CD, download the service pack files from the Avaya 
Support web site to your laptop.

Service packs may or may not be needed, depending on the release of Communication 
Manager. For both new installations and upgrades, you may need to install a service pack after 
the installation or upgrade. For an upgrade, you may need a service pack before the upgrade as 
well.

To download a pre-upgrade service pack

1. On your laptop, create a directory to store the file (for example, c:\S8300download).

2. Connect to the LAN using a browser on your laptop or the customer’s PC and access 

http://

www.avaya.com/support 

on the Internet to copy the required Communication Manager 

service pack file to the laptop.

3. At the Avaya support site, click 

Downloads

4. Click on 

Latest TN Circuit Pack, Media Server, and Media Gateway Firmware and 

Software Updates

.

5. Scroll down to the 

Software Update table for Media Servers running Communication 

Manager

.

6. Click on the link for the appropriate G.A. load.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments