manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 791 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 791

Issue 10.2 May 2007

791

 

Table 46: Equipment List: Media Modules 

Media Modules

 MM710 T1/E1 Media 
Module

Comcode (for Services Ordering Only): 700394737

The MM710 T1/E1 Media Module offers the combined features of a DEFINITY 
DS1 circuit pack and will include the following:

●

A built-in CSU

●

AMI-BASIC

●

Both A-law for E1 and 

μ

 -law for T1

●

Line Coding: AMI, ZCS, B8ZS for T1 and HDB3 or AMI for E1

●

Stratum 3 Clock compatibility

●

Trunk signaling for supporting US and International CO trunks and tie 
trunks as currently in existence

The MM710 T1/E1 Media Module supports the universal DS1 conforming to 
1.544 Mbps T1 standard and 2.048 Mbps E1 standard
ISDN PRI is also supported for T1 or E1 revenue-associated option. The MM710 
is RoHS compliant.

DEF DS1 LOOPBACK JACK 700A

Provides the ability to remotely troubleshoot the MM 710 T1/E1 Media Module. It 
is required for any customer with a maintenance contract and highly 
recommended for any other customer.

Material Code: 
107988867

Apparatus Code: None

Required for any 
customer with a 
maintenance contract 
and an MM710 T1/E1 
Media Module, highly 
recommend for other 
customers to avoid 
expensive technician 
visits.

1 of 4

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments