manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 230 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 230

Installing a new G700 without an S8300 using the Gateway Installation Wizard

230 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

IP Network Region Screen 

2. Complete the fields as described in 

Administration for Network Connectivity for Avaya 

Communication Manager, 

555-233-504

.

Note:

Note:

It is strongly recommended to use the defaults in the screen. However, for the 

RTCP Enabled 

and 

RSVP Enabled

 fields, the entry should be 

n

 (no).

3. If the network region of the G700 (1 in this example) is different from that of the S8400, 

S8500, or S8700-series CLAN board(s), you must interconnect the two regions. 

Press 

NextPage

 twice to display page 3, of the 

Inter Network Region Connection 

Management

 screen.

This screen shows the source region (1) and the first 15 destination network region 
numbers. (Pages 4–19 show destination regions 16–250). 

change ip-network-region 1 

Page   1 of   19 

                               IP NETWORK REGION

Region: 1  

Location:

Authoritative Domain:

    Name: 

MEDIA PARAMETERS

Intra-region IP-IP Direct Audio: yes

Codec Set: 1

   

 Inter-region IP-IP Direct Audio: yes

UDP Port Min: 2048

 

             IP Audio Hairpinning? y

UDP Port Max: 3048

DiffServ/TOS PARAMETERS

RTCP Reporting Enabled? n

 Call Control PHB Value: 34

RTCP MONITOR SERVER PARAMETERS

Audio PHB Value: 46

Use Default Server Parameters? y

Video PHB Value: 26

802.1P/Q PARAMETERS

 Call Control 802.1p Priority: 7

Audio 802.1p Priority: 6

 

Video 802.1p Priority: 5

AUDIO RESOURCE RESERVATION PARAMETERS

H.323 IP ENDPOINTS

RSVP Enabled? n

H.323 Link Bounce Recovery? y

 Idle Traffic Interval (sec): 20

   Keep-Alive Interval (sec): 5

  

Keep-Alive Count: 5

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments