manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 614 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 614

Manual upgrade of an S8300A and G700 to R4.0

614 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Installing IA770 service pack (or RFU) files, if any

If IA770 is being used, a post-upgrade service pack for IA770 may be required. See the IA770 
documentation for procedures to install a service pack. The service pack file and documentation 
can be found on the Avaya Support Web Site at http://support.avaya.com. 

1. Select 

Messaging Administration

 from the main menu.

2. Select 

Utilities

 from the Messaging Administration menu.

3. Select 

Software Management

 from the Utilities menu.

4. Select 

Advanced Software Installation

 from the Software Management menu.

5. Select 

Continue this operation without current system backup

.

6. Select the IA770 update package and click 

Install Selected Packages

.

Note:

Note:

The system automatically prompts you to restart INTUITY AUDIX when the 
service pack has been installed. Therefore, if you restart AUDIX at this time, you 
do 

not 

need to perform the following procedure, 

Starting IA770 INTUITY AUDIX 

Messaging, if installed

.

Starting IA770 INTUITY AUDIX Messaging, if installed

!

CAUTION:

CAUTION:

You do 

not

 need to perform this task if you restarted AUDIX as a part of the 

installation of the IA770 service pack.

After the IA770 INTUITY AUDIX Messaging application has been updated, you must restart it 
using the following steps:

1. From the 

Maintenance Web Page

, select 

Messaging Administration

 from the 

Miscellaneous

 menu.

The 

Messaging Administration

 Web page is displayed in a new Web browser window.

2. From the 

Messaging Administration

 Web page, select 

Utilities

.

The 

Utilities

 Web page is displayed.

3. Select 

Start Messaging Software

.

The 

Start Messaging Software

 Web page is displayed. This page will display the status of 

the system as it starts.

4. When the message, "Startup of the Voice System is complete", is displayed, select the 

Return to Main

 button and do the next procedure in this document.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments