Home
/
Avaya
/
G700
/
Installing And Upgrading

Avaya G700, Installing And Upgrading, Page: 203 / 808

Share

Page: 203 / 808

Avaya G700 Installing And Upgrading Download Page 203

Before going to the customer site

Issue 10.2 May 2007

203

Before going to the customer site

The procedures in this section should be completed before going to the customer site or before
starting a remote installation.

Getting information that the project manager provides

Ask the project manager for the information needed to prepare for this installation.

B: Information checklists

provides several checklists to help you gather the installation and

upgrade information.

Installing the Gateway Installation Wizard

To obtain and install the GIW software

1. Go to

http://support.avaya.com/avayaiw

2. Click on

Download Gateway Installation Wizard (GIW)

.

3. Scroll down to the GIW program file, and click on the latest filename (for example,

GIW-4.0-1.exe

).

4. Save it to a directory on your laptop.

5. Click on the GIW Readme file (for example,

GIW-4.0-1.README

).

6. Save this file to your laptop.

7. Follow the instructions in the Readme file to install the GIW.

Setting Up the TFTP Server on Your Laptop or
on a Customer PC, if Necessary

A tar.gz file, which you obtain from a CD-ROM or a website, contains new G700 firmware. To
load the firmware on a G700 Media Gateway, you must place this tar.gz file on a TFTP server
that is connected to the customer’s LAN. The TFTP server can be a customer computer or it
can be your laptop if you have arranged with the customer to connect your laptop to the LAN.

Note:

Note:

A Linux or Unix TFTP server should be used only if the customer already has an
existing one. In these cases, you download the tar.gz file to your laptop and give
it to the customer for proper placement and execution.

«
...
201
202
203
204
205
...
»

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments