manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 477 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 477

Administer Communication Manager

Issue 10.2 May 2007

477

 

3. Close the screen.

Enable Ethernet 
Port?

The Ethernet port must be enabled (

y

) before it can be 

used. The port must be disabled (

n

) before changes can 

be made to its attributes on this screen.

Network Region

The region number for this IP interface.

VLAN

The VLAN number assigned to the C-LAN, if any.

Target socket 
load

The threshold for the number of sockets used by this 
C-LAN within the same Gatekeeper Priority as that of 
other IP interfaces. If the targeted number is exceeded 
on a CLAN, a warning alarm is generated. If the targeted 
percentage is exceeded on an PE interface, a procr error 
is generated.

Receive Buffer 
TCP Window 
Size

The threshold for the number of sockets used by this 
C-LAN that triggers a warning message to be sent to the 
error log.

Link

This display only field shows the unique number for the 
Ethernet link. The Ethernet link was assigned on the data 
module form.

Allow H.323 
Endpoints

Enter a ’y’ to allow H.323 endpoint connectivity on this 
CLAN. Enter ’n’ if you do not want H.323 endpoints to 
connect to this CLAN.

Allow H.248 
Gateways?

Enter ’y’ to allow H.248 gateway connectivity to this 
CLAN. Enter ’n’ if you do not want H.248 gateways to 
connect to this CLAN.

Gatekeeper 
Priority

This value is used on the alternate gatekeeper list. The 
lower the number the higher the priority. Valid values for 
this field are one through nine with five being the default. 
This field displays only if the 

allow H.323 endpoints

 field 

is set to a yes on this form. 

Auto?

Enter ’y’ or ’n’ to set auto-negotiation.

Speed

Enter 10 or 100 Mbps if 

Auto

 was set to no.

Duplex

Enter half or full if 

Auto

 was set to no.

Table 30: IP interfaces field descriptions  (continued)

Field

Conditions/Comments

2 of 2

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments