manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 489 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 489

Complete the Installation of the S8300 (if the Primary Controller)

Issue 10.2 May 2007

489

 

Complete the Installation of the S8300
(if the Primary Controller)

Consult the planning documentation to obtain the necessary information to complete the 
installation. 

Part of the final process will be to: 

●

Connect and administer test endpoints

●

Test the endpoints

●

Administer Communication Manager for trunks, features, networking, or other items 
required by the customer

●

Complete the electrical installation

●

Enable adjunct systems 

Note:

Note:

Follow the existing process and procedures to register the S8300.

Updating IA770 INTUITY AUDIX Messaging, if installed

Stopping IA770 INTUITY AUDIX Messaging, if loading an IA770 update

After the upgrade is complete, perform the following post-upgrade tasks.

1. From the 

Maintenance Web Page

, select 

Messaging Administration

 from the 

Miscellaneous

 menu.

The 

Messaging Administration

 Web page is displayed in a new Web browser window.

2. From the 

Messaging Administration

 Web page, select 

Utilities

.

The 

Utilities

 Web page is displayed.

3. Select 

Stop Messaging Software

.

The 

Stop Messaging Software

 Web page is displayed.

4. Select the 

Stop

 button.

The shutdown of the messaging server will begin once all users have logged off from IA 
770. Once the server has been stopped, the Web page will display status information. Once 
this process has begun, it will take a few minutes to complete the shutdown.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments