Avaya G700, Installing And Upgrading, Page: 408 / 808

Manual installation of a new G700 with an S8300
408 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
●
Installing new firmware on the media modules on page 461
●
Setting rapid spanning tree on the network on page 463
Administer an S8300 primary controller
●
Assigning Node Names and IP Addresses for the LSPs on page 465
●
Administering Network Regions on page 466
●
Associating LSPs with Network Regions on page 467
●
Administering IP Interfaces on page 468
●
Identifying LSPs to the S8300 primary controller on page 469
Administer an S8400, S8500, or S8700-series primary controller
●
Assigning Node Names and IP Addresses for the C-LANs and LSPs on page 471
●
Administering Network Regions on page 472
●
Assigning LSPs to the Network Regions on page 474
●
Administering IP Interfaces on page 475
●
Identifying the Survivable Processor on the primary controller on page 479
Administer the media gateway
●
Administering the Media Gateway on page 480
Set up alarming
●
Configuring the primary server to report alarms to a services support agency on page 486
●
Configuring the G700 Media Gateway to send its traps to a network management system
(NMS)
on page 487
Complete the installation of the S8300 (if the primary controller
●
Updating IA770 INTUITY AUDIX Messaging, if installed on page 489
●
Backing up the system on page 492
●
If using IA770, administer Communication Manager for Integrated Messaging on page 494
●
Complete the Installation Process (for an S8300 LSP) on page 494
Before Going to the Customer Site
The procedures in this section should be completed before going to the customer site or before
starting a remote installation.