Avaya G700, Installing And Upgrading, Page: 492 / 808

Manual installation of a new G700 with an S8300
492 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
If IA 770 fails to start after a new installation
If you have installed or upgraded IA 770 INTUITY AUDIX and it does not start, you must ensure
that an IP address has been provided for use with IA 770. To check for the IP address, you must
use the
Configure Server option through the Maintenance Web pages.
On the Configure Interfaces screen, ensure that a valid IP address is present in the Integrated
Messaging section .
Saving translations
To save translations:
1. In the SSH session, open a SAT session.
2. Log in again as craft .
3. Type
save translation
and press Enter .
When the save is finished, the system displays the message,
Command successfully completed.
Backing up the system
To back up the system to compact flash media (S8300C Media Server only)
1. Plug the cable to the compact flash drive into a USB port on the S8300C.
2. Insert a 128-Mb compact flash media into the top right slot of the drive.
3. On the S8300 main menu, select Backup Now .
The system displays the Backup Now screen.
4. Select the type of data you want to back up by selecting the appropriate data set.
5. Select Local Compact Flash Card back up the data onto the compact flash card.
Optionally, select Format Compact Flash to format a new card.
Note:
Note:
The compact flash card needs to be formatted only before the first use.
6. Click Start Backup .
The system displays the results of your backup procedure on the Backup Now results
screen.