manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 354 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 354

Telephones and adjunct systems

354 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Uninterruptible power supply (UPS)

The Avaya 1000-2000 VA online Uninterruptible power systems (UPSs) provide power 
protection for telecommunications systems and equipment. Avaya UPSs are a cost-effective 
measure to avoid costly downtime. The Avaya UPS provides complete isolation from power 
disturbances to protect customer’s data and equipment. It can keep the phones up and ensure 
network reliability, but it also provides customizable alarm and monitoring capabilities.

Avaya online UPSs feature:

●

Isolation of connected equipment from all incoming power problems

●

Doubled battery service life and advanced warning of the end of useful battery life with 
Advanced Battery Management (ABM) technology

●

Prolonged backup time with Extended Battery Modules (EBMs)

●

Conditioned incoming power without depleting the battery to preserve battery power for 
complete power outages

●

Adapted to rack-mount and standalone tower applications with two-in-one form factor

●

Standard RS-232 communications port

●

Standard DEFINITY alarm contacts

●

Six-foot communications cable included

●

Web/SNMP card to add direct control and monitoring capabilities in SNMP-based 
networks and via Web browsers (Optional for all models except select 1000 VA UPS).

1. Divided into two groups that can be controlled independently by the software.

2. Unit fits into standard 19-inch equipment racks. For tower configurations, the unit stands 17 inches high.

3. Also user-selectable for 100, 110 and 127 V.

Model selection guide and specifications

Model

SAP Code

Power Out 

(VA/Watt

Output 

Receptacles

1

Dimensions (HxWxD)

2

Weight (lb)

UPS Models: 120 Vac

3

, 50/60 Hz, auto-sensing

1000 VA w/Web/

SNMP Card

700290273

700/490

(6) 5-15R

3.5 x 17.0 x 19.4 in.

34

1000 VA

408357010

1000/700

(6) 5-15R

3.5 x 17.0 x 19.4 in.

34

1500 VA

408357028

1500/1050

(6) 5-15R

3.5 x 17.0 x 19.4 in.

50

2000 VA

700019300

2000/1400

(4) 5-15R & (2) 

5-20R

3.5 x 17.0 x 19.4 in.

50

Optional Extended Battery Modules (EBMs)

EBM 24V

408357044

-

-

3.5 x 17.0 x 19.4 in.

65

EBM 48V

408357051

-

-

3.5 x 17.0 x 19.4 in.

65

XBU48

408357069

-

-

31.8 x 17.2 x 24.6 in.

665

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments