Avaya G700 Installing And Upgrading Download

Page: 476 / 808

Manual installation of a new G700 with an S8300

476 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

IP Interfaces Screen

2. Complete the fields as described the in

Table 30

change ip-interfaces 01a03

Page 1 of 1

IP INTERFACES

Type: C-LAN

Slot: 01A03

Code/Suffix: TN799 d

Node Name: procr

IP Address: 135.9.41.146

Subnet Mask: 255.255.255.0

Link: 1

Gateway Address: 135.9.41.254

Enable Ehternet Port? y

Allow H.323 Endpoints? y

Nework Region: 1

Allow H.248 Gateways? y

VLAN: 0

Gatekeeper Priority: 5

Target socket load:

Receive Buff TCP Window Size:

ETHERNET OPTIONS

Auto? n

Speed: 100 Mbps

Duplex: Full

Table 30: IP interfaces field descriptions

Field

Conditions/Comments

Type

Either C-LAN.

Slot

The slot location for the circuit pack.

Code/Suffix

Display only. This field is automatically populated with
TN799 for C-LAN.

Node name

The unique node name for the IP interface. The node
name here must already be administered on the Node
Names screen.

IP Address

The IP address (on the customer LAN) of the C-LAN.

Subnet Mask

The subnet mask associated with the IP address for this
IP interface.
For more information on IP addresses and subnetting,
see “

Administration for Network Connectivity for Avaya

Communication Manager, 555-233-504”

Gateway
Address

The address of a network node that serves as the default
gateway for the IP interface.

1 of 2

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G700

Reviews:

Related manuals for G700

Brands by name

Popular brands

Avaya G700, Installing And Upgrading

Search results

Summary of Contents for G700

Reviews:

Related manuals for G700

Brands by name

Popular brands