manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 294 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 294

Upgrading an existing S8300B or S8300C to R4.0 using the Upgrade Tool

294 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Post-upgrade tasks

After the upgrade is complete, perform the following post-upgrade tasks:

●

Installing IA770 service pack (or RFU) files, if any

on page 294

●

Copying IP Phone firmware to the media server, if necessary

on page 297

●

Restoring the 4600-series phone configuration file, if any

on page 298

●

Completing the upgrade process (S8300 is the primary controller)

on page 298

Stopping IA770 INTUITY AUDIX Messaging, if loading an IA770 
update

After the upgrade is complete, perform the following post-upgrade tasks.

1. From the 

Maintenance Web Page

, select 

Messaging Administration

 from the 

Miscellaneous

 menu.

The 

Messaging Administration

 Web page is displayed in a new Web browser window.

2. From the 

Messaging Administration

 Web page, select 

Utilities

.

The 

Utilities

 Web page is displayed.

3. Select 

Stop Messaging Software

.

The 

Stop Messaging Software

 Web page is displayed.

4. Select the 

Stop

 button.

The shutdown of the messaging server will begin once all users have logged off from IA 
770. Once the server has been stopped, the Web page will display status information. Once 
this process has begun, it will take a few minutes to complete the shutdown.

Installing IA770 service pack (or RFU) files, if any

If IA770 is being used, a post-upgrade service pack for IA770 may be required. See the IA770 
documentation for procedures to install a service pack. The service pack file and documentation 
can be found on the Avaya Support Web Site at http://support.avaya.com. 

1. Select 

Messaging Administration

 from the main menu.

2. Select 

Utilities

 from the Messaging Administration menu.

3. Select 

Software Management

 from the Utilities menu.

4. Select 

Advanced Software Installation

 from the Software Management menu.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments