Home
/
Avaya
/
G700
/
Installing And Upgrading

Avaya G700, Installing And Upgrading, Page: 281 / 808

Share

Page: 281 / 808

Avaya G700 Installing And Upgrading Download Page 281

Run the Upgrade Tool to upgrade the primary controller, LSPs, and G700 media gateways

Issue 10.2 May 2007

281

Run the Upgrade Tool to upgrade the primary controller,
LSPs, and G700 media gateways

This section describes the procedures to use the Upgrade Tool to upgrade the S8300 Media
Server to Communication Manager release 4.0, including its LSPs and G700 media gateways.

This procedure also applies to the upgrade of the G350 and G250-series Media Gateways and
includes the following tasks:

●

Checking the current releases of all devices (optional)

●

Running the upgrade

●

Viewing the status of the upgrade in progress

●

Installing updated authentication files

●

Saving translations

●

Setting rapid spanning tree on the network

Checking the current releases of all devices (optional)

You should check the current releases of all devices (LSPs, media gateways, and media
modules) to verify which devices need to be upgraded. This step, while optional, can speed the
upgrade process if you find that some devices do not require upgrades.

1. On the Welcome page of the Communication Manager Web pages, select

Launch

Upgrade Tool

.

The Upgrade Tool Welcome page appears.

2. Select

Query Versions

from the menu on the left pane.

The Query Versions Select page appears.

«
...
279
280
281
282
283
...
»

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments