Home
/
Avaya
/
G700
/
Installing And Upgrading

Avaya G700, Installing And Upgrading, Page: 284 / 808

Share

Page: 284 / 808

Avaya G700 Installing And Upgrading Download Page 284

Upgrading an existing S8300B or S8300C to R4.0 using the Upgrade Tool

284 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

Running the upgrade

Follow these steps:

1. To set up and schedule upgrades, click

Schedule Upgrade

.

The Schedule Upgrade screen appears. At the bottom of the screen, the system displays all
main servers, LSPs, and gateway targets that are administered.

2. Fill in all appropriate fields. Click

Help

for information about the fields on the screen.

Note:

Note:

The file names must be entered in the correct format. Do not change the names
of the firmware files in the process of loading them onto the TFTP servers. See

Firmware file formats

Use the information from the planning forms or Upgrade Worksheets to complete the
Software/Firmware fields.

«
...
282
283
284
285
286
...
»

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments