Avaya Customer Interaction Express 1.0, User Manual

Page: 278 / 344

278 User Manual CIE 1.0 System Administration
Port Manager — Port assignments tab
Fax gateway Æ Port Manager tab Æ Port assignments tab
The following table display shows the settings on the Port assignments tab.
Add button
To add a configuration, follow these steps:
2. Click the Add button. A new line with a list box appears:
3. Select the configuration type: DEFAULT_FAX
You can select configuration types you have created in addition to this default configuration type.
4. You can enter the number of inputs/outputs based on the configuration type. The number depends
on the medium used:
S
0
port: 2 channels
S
2m
port: 30 channels
Channels are allocated following requests to the fax gateway. To select a secure setting, allocate the
channels exactly to the outputs and inputs, for example 20 output channels, 10 input channels for an
S
2m
port.
You can also overload ports to use the system more effectively, for example 30 output channels, 30
input channels. If you use this option, you can only guarantee sending and receipt if not all of the
channels are busy. Otherwise the busy tone sounds, and you must wait until at least one channel
becomes available.
5. Click the green checkmark to accept the configuration. (Click the red X to discard the
configuration.) The configuration is accepted (discarded). The icons change.
6. Continue to create configurations and click the green check mark to accept the configuration.
7. Be sure to click the Save button before going to another window. Otherwise the configurations you
have created and accepted will be lost.
Edit
1. Click the pencil to edit the configuration.
Delete
1. Click the trash icon to delete the configuration.
Setting Comments
Assigned UMS lines Enter the lines reserved for C3000.
Default: 60