Avaya Customer Interaction Express 1.0, User Manual

Page: 157 / 344

Connecting to I55
Edition: 1.1 03/08/2007 157
Installing the I55 task server
To connect an I55 PBX to a CIE system, you must install the I55 task server.
Prerequisites
You must first install all necessary components except the I55 task server.
Installation
To install the I55 task server, follow these steps. Use the guided installation as usual.
1. The guided installation is started. Select I55 task server .
2. Click Install . The Welcome dialog opens.
3. Click Next . The End User License Agreement dialog opens.
4. Select accept the terms in the License Agreement .
5. Click Next . The Choose Setup Type dialog opens.
6. Click Complete . The General Settings dialog opens. Enter the following settings.
7. Click Next . The Ready to Install dialog opens.
8. Click Install . This takes about five seconds.
9. Click Finish to complete the installation.
Settings Comments
Host name of the
CORBA naming Service Specify the host name or TCP/IP number of the PC running the Corba
naming service. Do
not use localhost as the host name.
Port As a general rule, use the default port 2809.
Host name of Trace
system server Specify the host name or TCP/IP number of the PC running the trace
server.
Port Port 10300 is the default setting. You cannot edit this entry.