Avaya Customer Interaction Express 1.0, User Manual

Page: 172 / 344

172 User Manual CIE 1.0 System Administration
DSPF controller
If you want to transfer announcements to the PBX, you need the DSPF controller application. You usually
install the DSPF controller application on an interface PC or a separate PC.
Note: Setup does not fully install the driver for the VTB. When you connect the VTB, the operating system
automatically detects the new hardware and begins the driver installation. A dialog window prompts you
to enter the path for the driver files. The files are in the directory where you installed the DSPF controller.
Application
For further information see the DSPF controller user manual.
Installation
To install the DSPF controller, follow these steps. Setup does not fully install the driver for the VTB. Use
the guided installation as usual.
1. The guided installation is started. Select DSPF Controller .
2. Click Install . The Welcome dialog opens.
3. Click Next . The End User License Agreement dialog opens.
4. Select accept the terms in the License Agreement .
5. Click Next . The Choose Setup Type dialog opens.
6. Click Complete . The General Settings dialog opens. Enter the following settings.
Settings Comments
Host name of the
CORBA naming Service Specify the host name or TCP/IP number of the PC running the Corba
naming service. Do
not use localhost as the host name.
Port As a general rule, use the default port 2809.
Host name of Trace
system server Specify the host name or TCP/IP number of the PC running the trace
server.
Port Port 10300 is the default setting. You cannot edit this entry.