Sirona ORTHOPHOS XG 3 DS, Руководство по обслуживанию

Страница: 86 / 578

59 38 399 D3352
2 – 28
D3352.076.01.13.02 07.2008
2.5 List of error messages Tab 2
z
replace if necessary
6-59
E5 13 53 Forehead support; system does not
block within setting range
z
Check headrest mechanics,
replace if necessary
6-19
E6 13 54 Forehead support is not ready for
operation This error is a sequential fault.
z
Unit restart:
Switch the unit OFF. Wait 30 sec.
Switch unit ON.
z
Repeat procedure and observe causal error
messages.
E6 13 57 Error when activating forehead sup-
port motor
z
Unit restart:
Switch the unit OFF. Wait 30 sec.
Switch unit ON and check functioning.
z
Please contact the Sirona Customer Service
Center (CSC) to find out whether a bugfix by
means of a software update is possible and per-
form such an update if necessary.
1-22
z
Check headrest mechanics,
replace if necessary
6-19
z
Replace board DX1
6-59
E6 13 58
Error when activating forehead sup-
port motor
Timeout of FPGA* module on board
DX1.
z
Acknowledge error
If the error occurs again...
z
Replace board DX1
6-59
z
Replace board DX11
6-59
E4 13 59 Forehead support drive defective
z
Replace the headrest
6-19
E5 13 60 Temple supports; have not left home
position despite movement pulses
z
Check light barriers V5_1 to V5_4,
3-15
replace headrest or
6-19
light barrier if necessary
6-49
z
Check cable L18,
3-17
replace if necessary
6-91
z
Check board DX5,
3-12
replace if necessary
6-59
E4 13 61
Temple supports; have not left home
position and no motor movement
z
Check motor M5_2,
3-14
replace headrest if necessary
6-19
z
Check light barriers V5_1 to V5_4,
3-15
replace headrest or
6-19
light barrier if necessary
6-49
z
Check cable L18,
3-17
replace if necessary
6-91
z
Check board DX5,
3-12
z
replace if necessary
6-59
Error code Description Actions required see page