Sirona ORTHOPHOS XG 3 DS, Руководство по обслуживанию

Страница: 493 / 578

båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
6 – 61
Tab 6 6.20 Replacing circuit boards
6.20
The following table provides an overview of various possible replacement sit-
uations and cross-references to detailed descriptions of the actions required
for the corresponding situations following board replacement.
Board Constellation Measures Page
DX1
z
Inserting a new DX1
z
ORTHOPHOS XG
Plus
z
System software version V02.20 or higher
z
Switch the unit ON.
z
Perform a software update of the
unit to version V02.27 or higher as
described in section 1.9.
1-22
z
ORTHOPHOS XG 5 / 3 / 3 PPE
DX11
z
Replacing a DX11
NOTE
i
The circuit board DX11 with software version V02.22 or higher requires
SIDEXIS software version V01.45 or higher for the update. Consequently, it is necessary to update the
entire unit to
software version V02.22 or higher or SIDEXIS V01.45 or higher.
z
Inserting a new DX11
z
ORTHOPHOS XG
Plus
z
System software version V02.20
z
Please proceed as described in sec-
tion 6.20.2,
Case A .
6-64
z
Inserting a new DX11
z
ORTHOPHOS XG
Plus
z
System software version V02.22 or higher
z
Please proceed as described in sec-
tion 6.20.2,
Case B .
6-67
z
Inserting a DX11 from another unit with soft-
ware version V02.22 or higher
z
ORTHOPHOS XG
Plus
z
System software version V02.22 or higher
z
Please proceed as described in sec-
tion 6.20.2,
Case C .
6-70
z
Inserting a new DX11
z
ORTHOPHOS XG 5
z
System software version V02.20
z
Please proceed as described in sec-
tion 6.20.2,
Case D .
6-72
z
Inserting a DX11 from another unit with soft-
ware version V02.20 or higher
z
ORTHOPHOS XG 5 / 3
z
System software version V02.20 or higher
CAUTION
Never use a module from another unit in an XG 3
PPE unit or vice versa.
z
Please proceed as described in sec-
tion 6.20.2,
Case E .
6-75
z
Inserting a new DX11
z
ORTHOPHOS XG 5 / 3 / 3 PPE
z
System software version V02.22 or higher
z
Please proceed as described in sec-
tion 6.20.2,
Case F .
6-77