Sirona ORTHOPHOS XG 3 DS, Руководство по обслуживанию

Страница: 519 / 578

båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
6 – 87
Tab 6 6.20 Replacing circuit boards
6.20
7. Confirm the “Basic“ system class (02):
To do this, first press the Memory button (LED above the R key lights
up) and then the
R key
.
8. Quit the service routine via the
u
p arrow key above selection field 3.
9. Switch the unit OFF.
Wait approximately 1 minute. Then switch the unit ON again.
Error message E6 15 05 (undefined system serial number) is displayed.
10. Acknowledge the error message with the R key .
11. Open the Service menu (see page 5-10).
12. Start service routine S008.3 and confirm the system serial number (see
page 5-50).
13. Quit the service routine via the
u
p arrow key above selection field 3.
14. Switch the unit OFF.
Wait approximately 1 minute. Then switch the unit ON again.
15. Install the current SIDEXIS software version (V01.53 or higher).
NOTE
i
If the current SIDEXIS version is a patch version, the previous officially
released main version of SIDEXIS has to be installed before the current
version can be installed.
16. Perform a software update to Version V02.27 or higher (automatic up-
date) (see also section 1.9.5).
17. Perform the complete system adjustment (see chapter 4):
– PAN adjustment
– CEPH adjustment, if installed
18. Perform an acceptance test (applies to Germany only);
without consulting an expert
19. Open the "Extended Details“ via SIXABCON.
This generates an XML file (with the system parameters) which is saved
under the network name of the system in the PDATA/P2K_Config folder
(see also section 1.10 on page 1-32).
z
The process is completed.
(
n
R
(
o
n
(
1 2 3
______02_ _________
R
E6 15 05
(
R
R