Sirona ORTHOPHOS XG 3 DS, Руководство по обслуживанию, Страница: 494 / 578

59 38 399 D3352
6 – 62
D3352.076.01.13.02 07.2008
6.20 Replacing circuit boards Tabs 6
DX6
(Tube assembly)
z
Replacing an X-ray tube assembly incl. DX6
z
Inserting a new X-ray tube assembly
z
ORTHOPHOS XG
Plus
z
System software version V02.20
z
Please proceed as described in sec-
tion 6.20.3,
Case G .
6-80
z
Inserting a new X-ray tube assembly
z
ORTHOPHOS XG
Plus
z
System software version V02.22 or higher
z
Please proceed as described in sec-
tion 6.20.3,
Case H .
6-83
z
Inserting an X-ray tube assembly from an-
other unit with software version V02.22
z
ORTHOPHOS XG
Plus
z
System software version V02.22 or higher
z
Please proceed as described in sec-
tion 6.20.3,
Case I .
6-85
z
Inserting a new X-ray tube assembly
z
ORTHOPHOS XG 5 / 3 / 3 PPE
z
System software version V02.20 or higher
z
Please proceed as described in sec-
tion 6.20.3,
Case J .
6-86
z
Inserting an X-ray tube assembly from an-
other unit with software version V02.20
z
ORTHOPHOS XG 5/3
z
System software version V02.20 or higher
CAUTION
Never use a module from another unit in an XG 3
PPE unit or vice versa.
z
Please proceed as described in sec-
tion 6.20.3,
Case K .
6-88
DX61
(Diaphragm unit)
z
Inserting a new DX61
z
Check the compatibility between the
software status of the modules and
that of the overall system. Perform
an update or a downgrade if neces-
sary.
NOTE
i
Please note that the specific diaphragm
unit required depends on the unit serial
numbers specified in the spare parts list.
1-24
DX7
(Easypad)
z
Inserting a new Easypad incl. DX7
z
ORTHOPHOS XG
Plus
z
System software status V02.20 or higher
z
It is essential that you perform a
software update to a system version
≥
V02.25
(see section 1.9).
NOTE
i
After the replacement of the Easypad,
the language settings on circuit board
DX7 are at the factory default
(00 = German, English, French,
Italian). If the configured system lan-
guage set (displayable via service rou-
tine S017.5 or the “extended detail que-
ry“ in SIXABCON) has a configuration
other than 00, this configuration will be
copied to board DX7 by the update func-
tion.
1-24
Board Constellation Measures Page