Sirona ORTHOPHOS XG 3 DS, Руководство по обслуживанию, Страница: 273 / 578

båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
5 – 5
Tab 5
Directory of all available service routines
Service routine XG 3 XG 3 PPE XG 5 XG
Plus
Function Page
S001 X X X X Radiation without rotary movement, fixed
radiation time 5-21
S002 X X X X Radiation without rotary movement,
maximum radiation time can be selected 5-23
S002: Test step 1 X X X X Primary diaphragm remains in last position
selected 5-24
S002: Test step 3 (not
for XG 3 / 3 PPE) – – X X Primary diaphragm opened fully 5-26
S002: Test step 4 (not
for XG 3 / 3 PPE) – – X X Filter element for 0.8 mm Cu step filter; the
primary diaphragm is set to a widened
opening symmetrical to the PAN setting so
that the step filter still remains covered 5-27
S005 X X X X General X-ray tube assembly service 5-28
S005: Test step 2 X X X X Automatic adjustment of preheating 5-29
S005: Test step 4 X X X X Fan test 5-31
S005: Test step 5 X X X X Temperature sensor test 5-33
S005: Test step 6 X X X X Switch off cool-down interval of the single
tank 5-34
S005: Test step 7 X X X X Setting continuous operation of the tube
assembly fan 5-37
S007 X X X X Error logging memory 5-40
S007: Test step 1 X X X X Display error logging memory 5-41
S007: Test step 2 X X X X Clear error logging memory 5-44
S007: Test step 5 X X X X Enabling the CAN bus logging in the
Miniweb 5-46
S008 X X X X Update service 5-48
S008: Test step 2 X X X X Overview of the module software versions 5-48
S008: Test step 3 X X X X Input/confirmation of unit serial number 5-50
S008: Testschritt 4 – – X X Initialize the function activation 5-54
S009 X X X X Flash file system 5-56
S009: Test step 4 X X X X Format flash file system 5-56
S012 X X X X CAN bus service 5-59
S012: Test step 2 X X X X Inquiry of the CAN status register of the
modules 5-60
S012: Test step 3 X X X X Resetting the CAN status register of the
modules 5-63
S012: Test step 4 X X X X Display of CAN bus cycle on LEDs of
modules 5-65