Sirona ORTHOPHOS XG 3 DS, Руководство по обслуживанию

Страница: 120 / 578

59 38 399 D3352
2 – 62
D3352.076.01.13.02 07.2008
2.6 List of available service routines Tab 2
S007 Error logging
Test step 1:
Display error logging memory
Test step 2:
Clear error logging memory
z
after error messages
5-40
Test step 5 (from V02.27):
Activation of CAN bus logging in the
miniweb
z
only after consulting with the Sirona Customer
Service Center!
S008 Update service
Test step 2:
Display of module software version
statuses
z
for checking the configuration
5-48
Test step 3:
Input/confirmation of
unit serial number
Test step 4
(not for XG3 and XG3PPE):
Initializing the function activation
z
after error messages
S009 Flash file system
Test step 4:
Format flash file system
z
after error messages
5-56
S012
(V02.27 or
higher) CAN bus service
Test step 2:
Query of CAN status register of mod-
ules
z
on suspicion of unstable CAN bus
z
in case of accumulated error messages EX yy
12; Ex yy 06, Ex yy 07, Ex yy 03
z
not suitable as an accompanying measure e.g.
"check connector of CAN bus" or "check bus ter-
minations"
5-59
Test step 3:
Query of CAN status register of mod-
ules
z
to be executed prior to service routine S012.2 if
required
Test step 4:
Display of CAN bus cycle on LEDs of
modules
z
in case of sporadic failures of modules on CAN
bus (after Ex yy 06, Ex yy 07,
Ex yy 08, Ex yy 12)
z
as accompanying measure during check of
plugs (wiggle) for firm seating
S014
(V02.28 or
higher)
Rotation motor service
Test step 1:
Travel of rotational drive to the Pan
home position
Test step 2 :
Travel of rotational drive to the Ceph
home position
Test step 3:
Free travel of rotational drive
Test step 4:
Display of light barrier signals of rota-
tional drive
z
for electromechanical problems with the ring
motor or the ring rotation system
5-67
Routine Description Required... see page