Sirona ORTHOPHOS XG 3 DS, Руководство по обслуживанию

Страница: 150 / 578

59 38 399 D3352
3 – 26
D3352.076.01.13.02 07.2008
3.10 Check data paths/Generate test images Tab 3
5. Select/confirm the service exposure:
Click
DIGITAL TEST PATTERN
– If several different X-ray components are available, a dialog box for
selecting the X-ray component appears on the screen. In this case,
select/confirm the required component.
– If only one X-ray component is available, the exposure readiness dia-
log box appears on the screen and shows the status of the exposure.
NOTE
i
During operation in the service mode, the unit switches from the user mode to
the PC service mode logged by the PC.
Once the exposure is completed, the unit switches back to the user mode.
6. Take an exposure:
– Press the R key on the Easypad (XG
Plus
) or Multipad (XG 5/3/3 PPE)
to move the unit back to its starting position.
– Press the release button. Hold down the button until the exposure has
been completed.
NOTE
i
A service message box indicates whether the generated test image is correct.
Acknowledge this message with
OK . The test image is displayed on the
screen.
T R
G