Sirona ORTHOPHOS XG 3 DS, Руководство по обслуживанию

Страница: 107 / 578

båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
2 – 49
Tab 2 2.5 List of error messages
2.5
*) TTP = Time Trigger Protocol
E7 71 21 No CAN bus connection.
DX11 does not start.
Note:
Occurs after power-on in the start
screen.
z
Start the detail query via Sixabcon
If DX11 responds...
z
Check signal path to DX71,
repair or replace cable/connector if necessary
6-91
z
Replace DX1
6-59
If DX11 does not respond...
z
Replace DX11
6-59
E3 71 30 Height adjustment keys actuated dur-
ing power-on
z
Unit restart:
Switch the unit OFF. Wait for 30 sec.
Switch unit ON, making sure that the Multipad is
not actuated during boot-up.
If the error occurs again...
z
Replace board DX71 or
Multipad
6-59
6-21
E3 71 31 Forehead support key pressed during
power-on
E3 71 32 Temple support keys actuated during
power-on
E3 71 33 Light localizer key actuated during
power-on
E3 71 34 Test key actuated during power-on
E3 71 35 Return key actuated during power-on
E3 71 36 Service key actuated during power-on
E3 71 37 Memory key actuated during power-
on
E3 71 38 Program selection key actuated during
power-on
E3 71 39 Radiation time key actuated during
power-on
E3 71 40 kV/mA key actuated during power-on
E3 71 41 Patient symbol key actuated during
power-on
Error code Description Actions required see page