Sirona ORTHOPHOS XG 3 DS, Руководство по обслуживанию

Страница: 318 / 578

59 38 399 D3352
5 – 50
D3352.076.01.13.02 07.2008
5.8 Service routine S008 Tabs 5
S008.3: Input/confirmation of unit serial number
5.8.2 S008: Test step 3
Selecting test step 3 1. Select test step 3 in selection field 2 with the arrow keys and confirm your
selection by pressing the Service key .
This test step is required...
z
if a software update is performed...
for XG 5 / 3 / 3 PPE: from V02.18.1 to a higher version
for XG
Plus
: from V02.19 to a higher
version.
The value X is then displayed in selection field 1 of service routine
S008.3 (and with the arrow keys for the XG
Plus
). When opened, the
routine is initially in the editing mode for entry of the unit serial number
(case A).
z
if modules have been replaced. In this case, the backup copy of the unit
serial number still stored in the unit must be reconfirmed (case B).
If this service routine is called up with a valid unit serial number, the possibility
of entering or confirming the serial number will be deactivated. The valid serial
number is displayed in selection field 1.
1
2
3
+ -
S008
3
n
(
1 2 3
S008_______3____
XG
Plus
:
Easypad touchscreen XG 5 / 3 / 3 PPE: Multipad
+
-
(
n
(
n
(
o
(
o