Sirona ORTHOPHOS XG 3 DS, Руководство по обслуживанию

Страница: 156 / 578

59 38 399 D3352
4 – 4
D3352.076.01.13.02 07.2008
4.1 Important information concerning adjustment Tabs 4
Default values in the Diaphragm/system adjustment menu in
SIDEXIS XG
During the adjustment, the default adjustment values are displayed in the text
boxes of the Diaphragm/system adjustment menu.
First perform the adjustment with these default values. If you do not attain the
desired result via this automatic adjustment, you should determine the adjust-
ment values manually by measuring the exposure with the SIDEXIS measur-
ing ruler and then overwrite the default values in the menu.
This procedure is described in the following sections.
Return ring travel with unit SW version V02.27 and higher
Starting with unit version V02.27, return ring travel is automatically performed
during service operation (during adjustment). Actuation of the R key before or
after each adjustment exposure (as described in the following chapters) can
thus be omitted.
NOTE
i
It is not possible to select a new exposure during the return ring travel
(incl. resetting of the actuators)!
If a selection is made during this period, the error message "It is not possible to
set the adjustment values at this time" or “No exposure can be taken" appears.
Acknowledge the error message and wait until the return ring travel has been
completed.