manualshive.com logo in svg

NXP Semiconductors LPC84x, Руководство пользователя

NXP Semiconductors LPC84x - мощная микросхема для разработки компактных устройств. Пользовательский мануал доступен для скачивания бесплатно с manualshive.com. Руководство поможет вам максимально эффективно использовать функционал данного продукта. Успешно создавайте уникальные устройства с помощью LPC84x.

Поделиться
Скачать
background image

UM11029

All information provided in this document is subject to legal disclaimers.

© NXP Semiconductors N.V. 2017. All rights reserved.

User manual

Rev. 1.0 — 16 June 2017 

494 of 515

NXP Semiconductors

UM11029

Chapter 32: Supplementary information

32.3 Legal information

32.3.1 Definitions

Draft — 

The document is a draft version only. The content is still under 

internal review and subject to formal approval, which may result in 
modifications or additions. NXP Semiconductors does not give any 
representations or warranties as to the accuracy or completeness of 
information included herein and shall have no liability for the consequences of 
use of such information.

32.3.2 Disclaimers

Limited warranty and liability — 

Information in this document is believed to 

be accurate and reliable. However, NXP Semiconductors does not give any 
representations or warranties, expressed or implied, as to the accuracy or 
completeness of such information and shall have no liability for the 
consequences of use of such information. NXP Semiconductors takes no 
responsibility for the content in this document if provided by an information 
source outside of NXP Semiconductors.

In no event shall NXP Semiconductors be liable for any indirect, incidental, 
punitive, special or consequential damages (including - without limitation - lost 
profits, lost savings, business interruption, costs related to the removal or 
replacement of any products or rework charges) whether or not such 
damages are based on tort (including negligence), warranty, breach of 
contract or any other legal theory. 

Notwithstanding any damages that customer might incur for any reason 
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards 
customer for the products described herein shall be limited in accordance 
with the 

Terms and conditions of commercial sale

 of NXP Semiconductors.

Right to make changes — 

NXP Semiconductors reserves the right to make 

changes to information published in this document, including without 
limitation specifications and product descriptions, at any time and without 
notice. This document supersedes and replaces all information supplied prior 
to the publication hereof.

Suitability for use — 

NXP Semiconductors products are not designed, 

authorized or warranted to be suitable for use in life support, life-critical or 
safety-critical systems or equipment, nor in applications where failure or 

malfunction of an NXP Semiconductors product can reasonably be expected 
to result in personal injury, death or severe property or environmental 
damage. NXP Semiconductors and its suppliers accept no liability for 
inclusion and/or use of NXP Semiconductors products in such equipment or 
applications and therefore such inclusion and/or use is at the customer’s own 
risk.

Applications — 

Applications that are described herein for any of these 

products are for illustrative purposes only. NXP Semiconductors makes no 
representation or warranty that such applications will be suitable for the 
specified use without further testing or modification. 

Customers are responsible for the design and operation of their applications 
and products using NXP Semiconductors products, and NXP Semiconductors 
accepts no liability for any assistance with applications or customer product 
design. It is customer’s sole responsibility to determine whether the NXP 
Semiconductors product is suitable and fit for the customer’s applications and 
products planned, as well as for the planned application and use of 
customer’s third party customer(s). Customers should provide appropriate 
design and operating safeguards to minimize the risks associated with their 
applications and products. 

NXP Semiconductors does not accept any liability related to any default, 
damage, costs or problem which is based on any weakness or default in the 
customer’s applications or products, or the application or use by customer’s 
third party customer(s). Customer is responsible for doing all necessary 
testing for the customer’s applications and products using NXP 
Semiconductors products in order to avoid a default of the applications and 
the products or of the application or use by customer’s third party 
customer(s). NXP does not accept any liability in this respect.

Export control — 

This document as well as the item(s) described herein 

may be subject to export control regulations. Export might require a prior 
authorization from competent authorities.

32.3.3 Trademarks

Notice: All referenced brands, product names, service names and trademarks 
are the property of their respective owners.

I

2

C-bus  — 

logo is a trademark of NXP B.V.

Содержание LPC84x




































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LPC84x

KAR-TECH MICRO Installation And Operation Manual preview
MICRO
Бренд: KAR-TECH Страницы: 28
JBL Authentics L8 Owner'S Manual preview
Authentics L8
Бренд: JBL Страницы: 16
JBL Authentics L 16 Owner'S Manual preview
Authentics L 16
Бренд: JBL Страницы: 17
RAPIBREW FREDDA 1.0 Quick Start Manual preview
FREDDA 1.0
Бренд: RAPIBREW Страницы: 16
Halsey Taylor GreenSpec HTHB-HVRGRN Installation, Care & Use Manual preview
GreenSpec HTHB-HVRGRN
Бренд: Halsey Taylor Страницы: 7
ViziT VIZIT-M441MG Operating Instruction preview
VIZIT-M441MG
Бренд: ViziT Страницы: 11
auna multimedia MC-30 DAB Manual preview
MC-30 DAB
Бренд: auna multimedia Страницы: 124
NANHUA DT001 Manual preview
DT001
Бренд: NANHUA Страницы: 6
jablotron JB-110N User Manual preview
JB-110N
Бренд: jablotron Страницы: 3
Mortuary Lift ULTIMATE 1000 Installation Suggestions preview
ULTIMATE 1000
Бренд: Mortuary Lift Страницы: 6
ASL INTERCOM PS 630 User Manual preview
PS 630
Бренд: ASL INTERCOM Страницы: 11
Sandstrom SHFUSB10 Instruction Manual preview
SHFUSB10
Бренд: Sandstrom Страницы: 32
Thermo Scientific CC58114PBC Installation And Operation Manual preview
CC58114PBC
Бренд: Thermo Scientific Страницы: 68
human care Roomer S User Manual preview
Roomer S
Бренд: human care Страницы: 19
Security Brands 27-210 Quick Start Manual preview
27-210
Бренд: Security Brands Страницы: 16
SainSmart Genmitsu User Manual preview
Genmitsu
Бренд: SainSmart Страницы: 49
EZ-ACCESS SUITCASE Singlefold Ramp Instructions preview
SUITCASE Singlefold Ramp
Бренд: EZ-ACCESS Страницы: 2
golmar 50124545 Instruction Manual preview
50124545
Бренд: golmar Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды