Hitachi ZA3000 Series, Инструкция по эксплуатации

Страница: 196 / 522

- iv -
5.1.3 Standard Addition Method
(ex-furnace addition) ................................... 5-8
5.1.4 Simple Standard Addition Method
(in-furnace addition) .................................... 5-12
5.1.5 Simple Standard Addition Method
(ex-furnace addition) ................................... 5-16
5.2 Using Stock Standard Solutions .......................... 5-20
5.3 Addition of Matrix Modifier ................................... 5-22
5.3.1 Drying of Matrix Modifier .............................. 5-23
5.4 Sequential Injection of Samples ........................... 5-24
5.5 Twin Injection ......................................................... 5-26
5.6 Cleaning Cuvette ................................................... 5-29
5.7 Sample Bumping Detection .................................. 5-32
5.8 Correction of Working Curve Drift
(Reslope function)
................................................. 5-33
5.9 Concentrating Sample ........................................... 5-35
5.10 Diluting Sample ..................................................... 5-36
5.11 Heating Injection of Sample .................................. 5-38
5.12 Measurement under the Same Conditions
(Copy Method) ....................................................... 5-39
5.13 Using an Existing Working Curve ........................ 5-40
5.14 Insertion and Remeasurement of Sample ............ 5-42
5.14.1 Insertion of Samples .................................... 5-42
5.14.2 Remeasurement
.......................................... 5-45
5.15 Setting Automatic Start ......................................... 5-46
5.16 Power/Water Saving by Eco Mode ....................... 5-48
5.16.1 Setting Eco Mode ........................................ 5-48
5.16.2 Canceling Eco Status .................................. 5-49
5.17 Restoring Data Lost due to a Power Failure ........ 5-51
6. USING THE QC FUNCTIONS ................................................................................ 6-1
6.1 Using Correlation Coefficient of Working Curve
(Check Working Curve)
......................................... 6-3
6.1.1 Setting Procedure ........................................ 6-3
6.1.2 Setting Procedure ........................................ 6-4
6.2 Using the Working Curve Range and RSD
(Check Sample)
...................................................... 6-5
6.2.1 Setting Procedure ........................................ 6-5
6.2.2 Contents to be Printed on the Report .......... 6-7
6.3 Using Sensitivity Variations of Standard Solution
(Check STD)
........................................................... 6-8
6.3.1 Setting Procedure ........................................ 6-8
6.3.2 Contents to be Printed on the Report .......... 6-9
6.4 Using the QC Sample (Check QC Sample) .......... 6-10
6.4.1 Setting Procedure ........................................ 6-10