Hitachi ZA3000 Series, Инструкция по эксплуатации

Страница: 246 / 522

3.1 Generation of Measurement Conditions
3 - 22
(2) Setting the Number of Samples
Enter a number of unknown samples in the [No. of UNK]
column, and click the [Reset] button or [Change] button.
To add or delete unknown samples, use the [Insert UNK]
button or [Delete UNK] button in the [Edit] frame.

[Reset] button
Used to set the [No. of UNK] of [Number of Samples].
As many [No.] lists in the sample table as the number of
unknown samples entered are created.
NOTE
: All of the data on [ID], [Sample Name], [Weight],
[Solvent], [Dil. Factor] and [Factor] of the entered
sample table is reset.

[Change] button
Used to change the [No. of UNK] of [Number of Samples].
This should be used to change the number of samples
while leaving the data on [ID], [Sample Name], [Weight],
[Solvent], [Dil. Factor] and [Factor] of the entered
sample table.
The method of changing the sample table varies according
to the relationship between the number of samples in
sample table and the entered [No. of UNK].
a. When the entered [No. of UNK] is greater than the
number of samples in sample table:
Example of execution;
Click [Change] button with 5 set for number of samples
in sample table and 10 set for [No. of UNK].
Fig. 3-12 Change of Sample Table (1)
UNK sample is added below [No.5] in sample table so
that the number of samples equals the entered [No. of
UNK].