Vicruns 2S-0.4G-B, User Manual

Page: 95 / 300

Chapter 5 Function & Parameter Table
-94-
Function
code
Name
Description
(setting range)
Factory
Default
Change
P6-02
Y1 output
selection
11: Ready to run
12: AI1>AI2
13: The upper limit frequency is
reached
14: The lower limit frequency is reached
15: Undervoltage status output
16: Communication settings
17: Timer output
18: Reverse running
19: reserved
20: Set length reached
21: Torque limited
22: Current 1 arrives
23: Frequency 1 arrives
24: Module temperature reached
25: Dropping
26: Cumulative power-on time arrives
27: Timed arrival output
28: The running time has arrived
29: Set count value reached
30: The specified count value arrives
31: Motor 1, Motor 2 indication
32: Brake control output
33: Running at zero speed 2
34: Frequency level detection PDT2
arrival
35: Zero current state
36: Software current overrun
37: The lower limit frequency is
reached, and the output is also output
when stopped
38: Alarm output
39: Reserved
40: AI1 input overrun
41: Reserved
42: reserved
43: Frequency reached 2
44: Current reaches 2
45: Fault output
1
☆
P6-03
Y2 output
selection (optional
accessory IO1
support function)
1
☆
C
h
a
p
te
r
5