Vicruns 2S-0.4G-B, User Manual

Page: 58 / 300

-57-
Chapter 4 Operation and Display
Confirm the parameters through the verification function,
and save them if they are correct.
Connect the motor to the load
Carry out no-load test run
Check whether the operation, rotation direction, multi-function
input and output, etc. are normal
Carry out actual load operation
Check whether the mechanical system operates normally
to flowchart
A
Figure 4-6 Open-loop vector control mode operation steps
Ž Sub-flow chart A-2 (simple motor operation under V/F control mode)
When operating by V/F control, set parameters according to the following flowchart.
V/F control is more effective in applications such as fans or pumps.
Carry out no-load test run
Check whether the operation, rotation direction, multi-function input
and output, etc. are normal
Confirm that the selected V/F curve (F2-00) is appropriate
Confirm that the parameter settings on the motor nameplate are correct
Carry out actual load operation
Check whether the mechanical system operates normally
to flowchart
A
to flowchart
A
Figure 4-7 Operation steps of V/F control mode
C
h
a
p
te
r
4