Vicruns 2S-0.4G-B, User Manual

Page: 187 / 300

Chapter 6 Description of Function Codes
-186-
Function
code
Name
Description
(setting range)
Factory
Default
Change
P7-57
Frequency reaches detection
value 2
0.00Hz ～ P0-14 50.00Hz
☆
P7-58
Frequency arrival detection 2
amplitude
0.0%
～
100.0% 0.0%
☆
The meaning is the same as that of frequency arrival detection value 1, please refer to P7-43,
P7-44 and Fig. 5-16 for details.
Function
code
Name
Description
(setting range)
Factory
Default
Change
P7-59 Zero current detection value 0.0% ～ 300.0% 10.0%
☆
P7-60 Zero current detection delay time
0.01s
～
300.00s
1.00s
☆
When the output current of the inverter during operation is less than or equal to the zero cu-
rrent detection level, and the duration exceeds the zero current detection delay time, and the
inverter multi-function terminal selects the No. 35 function, the ON signal is output.
Function
code
Name
Description
(setting range)
Factory
Default
Change
P7-61
Output current amplitude
detection
20.0%
～
400.0% 200.0%
☆
P7-62
Software overcurrent maximum
allowable time
0s
～
3600.0s
0s
☆
When the inverter is running and the output current is greater than the output current amplitu -
de detection value P7-61, and the duration exceeds the software overcurrent point detection
delay time P7-62, and the inverter multi-function output terminal selects 36, the ON signal is
output.
Function
code
Name
Description
(setting range)
Factory
Default
Change
P7-63 Current reaches detection value 2 20.0%
～
300.0% 100.0%
☆
P7-64
Current arrival detection 2
amplitude
0.0%
～
300.0%
0.0%
☆
The meaning is the same as that of current reaching detection 1, please refer to the descript -
ion of P7-45 and P7-46 for details.
C
h
a
p
te
r
6