Vicruns 2S-0.4G-B, User Manual

Page: 212 / 300

-211-
Chapter 6 Description of Function Codes
Group PC: Multi-segment instruction and simple PLC function
The simple PLC function is that the inverter has a built-in programmable logic controller (PLC)
to complete the automatic control of multi-segment frequency logic. The running time, running
direction and running frequency can be set to meet the requirements of the process.
KD600 series intelligent inverter can realize 16-stage speed change control, and there are 4
kinds of acceleration and deceleration time for selection.
When the set PLC completes a cycle, the multi-function digital output terminal Y1, multi-
function relays RELAY1 and RELAY2 can output ON signal. For details, see P6-00~P6-02.
Function
code
Name
Description
(setting range)
Factory
Default
Change
PC-00 Multi-speed 0 -100.0% ～ 100.0% 0.0%
☆
PC-01 Multi-speed 1 -100.0% ～ 100.0% 0.0%
☆
PC-02 Multi-speed 2 -100.0% ～ 100.0% 0.0%
☆
PC-03 Multi-speed 3 -100.0% ～ 100.0% 0.0%
☆
PC-04 Multi-speed 4 -100.0% ～ 100.0% 0.0%
☆
PC-05 Multi-speed 5 -100.0% ～ 100.0% 0.0%
☆
PC-06 Multi-speed 6 -100.0% ～ 100.0% 0.0%
☆
PC-07 Multi-speed 7 -100.0% ～ 100.0% 0.0%
☆
PC-08 Multi-speed 8 -100.0% ～ 100.0% 0.0%
☆
PC-09 Multi-speed 9 -100.0% ～ 100.0% 0.0%
☆
PC-10 Multi-speed 10 -100.0% ～ 100.0% 0.0%
☆
PC-11 Multi-speed 11 -100.0% ～ 100.0% 0.0%
☆
PC-12 Multi-speed 12 -100.0% ～ 100.0% 0.0%
☆
PC-13 Multi-speed 13 -100.0% ～ 100.0% 0.0%
☆
PC-14 Multi-speed 14 -100.0% ～ 100.0% 0.0%
☆
PC-15 Multi-speed 15 -100.0% ～ 100.0% 0.0%
☆
When the frequency source selection P0-06, P0-07, P0-10 is determined as the multi-speed
running mode, it is necessary to set PC-00~PC-15 to determine its characteristics.
Description: The symbols of PC-00 ～ PC-15 determine the running direction of simple PLC. If
it is a negative value, it means running in the opposite direction.
Simple PLC schematic diagram:
C
h
a
p
te
r
6