-25-
Chapter 3 Installation
3.1.3 The installation of the model needs to pay attention to the problem of heat
dissipation. So please note the following:
Ø
Ø
Ø
Ø
Please install the inverter vertically so that the heat can be dissipated upwar-
ds. But not upside down. If there are many inverters in the cabinet, it is better
to install them side by side. In the occasions that need to be installed up and
down, please refer to Figure 3-1 to install the heat insulation deflector.
The installation space is as shown in Figure 3-1 to ensure the cooling space
of the inverter. However, please consider the heat dissipation of other comp-
onents in the cabinet when arranging.
The mounting bracket must be made of flame retardant material.
For applications with metal dust, it is recommended to install the radiator out-
side the cabinet. At this time, the space in the fully sealed cabinet should be
as large as possible.
3.1.4 Mechanical installation methods and steps
installation
structure
Installation Notes
instructions
Plastic structure
through wall
installation
Remove the bottom plate of the inverter;
Ø
Insert the box into the cabinet with holes in
Ø
the installation size, and fix it with M4x12
screws and M4 nuts;
Put the bottom plate back into the inverter;
Ø
Figure 3-2
Sheet metal
structure through
wall installation
Install the flange type hanging angle to the
Ø
upper and lower parts of the inverter body;
Put the inverter into the cabinet with the
Ø
installation holes opened according to the
size, and fix it with M6 screws and nuts;
Figure 3-3
C
h
a
p
te
r
3
Summary of Contents for 2S-0.4G-B
