Vicruns 2S-0.4G-B, User Manual

Page: 54 / 300

-53-
Chapter 4 Operation and Display
Group B1 Factory Customized User Function Codes
Function
code
Factory
Default
Name
Function
code
Factory
Default
Name
B1-00 0
Clear Custom
Feature Selection
B1-10 uP4-05
Motor 1 rated
frequency
B1-01 uP0-03 control method B1-11 uP4-06 Motor 1 rated speed
B1-02 uP0-04 command source B1-12 uP4-12
Acceleration at
Dynamic Full Tuning
B1-03 uP0-06
Main frequency
source X selection
B1-13 uP4-13
Deceleration at
dynamic full tuning
B1-04 uP0-23 Acceleration time 1 B1-14 uP5-00
DI1 terminal function
selection
B1-05 uP0-24 Deceleration time 1 B1-15 uP5-01
DI2 terminal function
selection
B1-06 uP4-00
Motor 1 tuning
selection
B1-16 uP5-02
DI3 terminal function
selection
B1-07 uP4-01 Motor 1 rated power B1-17 uP6-00
Relay Relay1 output
selection
B1-08 uP4-02 Motor 1 rated voltage B1-18 uP6-01
Relay Relay2 output
selection
B1-09 uP4-04 Motor 1 rated current B1-19 uP6-02 Y1 output selection
The inverter is in the -BASE basic menu mode by default. When the user needs to
switch the menu mode, press and hold the ENTER key for 3s in the status parame-
ter interface to switch the menu mode. After the switch is successful, the current
menu mode (-BASE\-USEr\-NOTF) will be displayed. ) for 3s, and then return to the
status parameter interface. At this time, you can view and set the function codes in
the current menu mode. For the specific process, see Figure 4-4 below.
4.4.3 Function code menu mode switch
C
h
a
p
te
r
4