Vicruns 2S-0.4G-B, User Manual

Page: 131 / 300

Chapter 6 Description of Function Codes
-130-
Use this parameter to select the frequency given channel. The frequency setting is realized
by the combination of the main frequency source X and the auxiliary frequency source Y.
Function
code
Name
Description
(setting range)
Factory
Default
Change
P0-10
Frequency source
selection
Ones place: 0
~
4
Tens place: 0~3
00
☆
F0
-
08
F0 - 09
+
|
Max
Min
0
1
2
3
0
1
2
3
4
F5 - 00 ~ F5 - 04
= 18
DI1 ～ DI5
X
Y
XY
Frequency
source selection
Frequency source
overlay selection
Overlay source
switching settings
target operating
frequency
Main
frequency
source X
Auxiliary
frequency
source Y
Amplitude
limit
frequency switching
frequency given
F0-10 bits
F0-10 Tens
place
Figure 6-1. Schematic diagram of frequency source superposition
Ones place: Frequency source selection:
0: Main frequency source X
The main frequency X is used as the target frequency.
1: Main and auxiliary operation results
The main and auxiliary operation results are used as the target frequency, and the relations-
hip between the main and auxiliary operations is shown in the "tens" description of this
function code.
2: Switch between main frequency source X and auxiliary frequency source Y
When the multi-function input terminal function 18 (frequency switching) is invalid, the main
frequency X is used as the target frequency.
When the multi-function input terminal function 18 (frequency source switching) is valid, the
auxiliary frequency Y is used as the target frequency.
3: Switch between the main frequency source X and the main and auxiliary oper -
ation results
When the multi-function input terminal function 18 (frequency switching) is invalid, the main
frequency X is used as the target frequency.
When the multi-function input terminal function 18 (frequency switching) is valid, the main and
auxiliary operation results are used as the target frequency.
C
h
a
p
te
r
6