Vicruns 2S-0.4G-B, User Manual

Page: 222 / 300

Chapter 6 Description of Function Codes
-221-
Group PE: AI multi-point curve setting
Function
code
Name
Description
(setting range)
Factory
Default
Change
PE-00 Curve 1 minimum input - 10.00V
～
PE-02 0.00V
☆
PE-01
Curve 1 minimum input
corresponding setting
-100.0% ～ 100.0% 0.0%
☆
PE-02 Curve 1 Knee 1 Input PE-00
～
PE-04 3.00V
☆
PE-03
Curve 1 inflection point 1 input
corresponding setting
-100.0% ～ 100.0% 30.0%
☆
PE-04 Curve 1 Knee 2 Input PE-02
～
PE-06 6.00V
☆
PE-05
Curve 1 inflection point 2 input
corresponding setting
-100.0% ～ 100.0% 60.0%
☆
PE-06 Curve 1 maximum input PE-06
～
10.00 10.00V
☆
PE-07
Curve 1 maximum input
corresponding setting
-100.0% ～ 100.0% 100.0%
☆
PE-08 Curve 2 minimum input -10.00
～
PE-10 0.00V
☆
PE-09
Curve 2 minimum input
corresponding setting
-100.0% ～ 100.0% 0.0%
☆
PE-10 Curve 2 Knee 1 Input PE-08
～
PE-12 3.00V
☆
PE-11
Curve 2 inflection point 1 input
corresponding setting
-100.0% ～ 100.0% 30.0%
☆
PE-12 Curve 2 Knee 2 Input PE-10
～
PE-14 6.00V
☆
PE-13
Curve 2 inflection point 2 input
corresponding setting
-100.0% ～ 100.0% 60.0%
☆
PE-14 Curve 2 maximum input PE-12
～
10.00V 10.00V
☆
PE-15
Curve 2 maximum input
corresponding setting
-100.0% ～ 100.0% 100.0%
☆
The above function code defines the relationship between the analog input voltage and the
set value represented by the analog input. When the analog input voltage exceeds the set
maximum input or minimum input range, the other part will be calculated as the maximum
input or minimum input.
When the analog input is current input, 1mA current is equivalent to 0.5V voltage.
The curve 1 and curve 2 are the same as the analog input quantization of the P5 group, but
the analog quantization of the P5 group is linear and the PE group curve can be set to the
curve type, so the analog input multi-point curve can be used more flexibly. The schematic
diagram is shown in Figure 6-30.
C
h
a
p
te
r
6