Vicruns 2S-0.4G-B, User Manual

Page: 189 / 300

Chapter 6 Description of Function Codes
-188-
Function
code
Name
Description
(setting range)
Factory
Default
Change
P7-69 Module temperature reached 0℃
～
90℃ 70℃
☆
When the module temperature of the inverter reaches the set value of P7-69, the multi-func-
tion output terminal outputs ON signal.
Function
code
Name
Description
(setting range)
Factory
Default
Change
P7-70
Output power display correction
factor
0.001 ～ 3.000 1.000
☆
Output power display = output power *P7-70, which can be viewed through monitoring code
U1-05.
Function
code
Name
Description
(setting range)
Factory
Default
Change
P7-71
Linear velocity display correction
factor
0.000
～
60.000 1.000
☆
Linear speed=P7-71*Number of HDI pulses sampled per second/Pb-07, which can be viewed
through monitoring parameter U1-14.
Function
code
Name
Description
(setting range)
Factory
Default
Change
P7-72
Cumulative power consumption
(kWh)
0 ～ 65535
Measured
value
●
The accumulated power consumption of the inverter so far can only be viewed but not modifi-
ed.
Function
code
Name
Description
(setting range)
Factory
Default
Change
P7-73 Performance software version 0.00 ～ 655.35 #.#
●
Performance software version number.
C
h
a
p
te
r
6