Vicruns 2S-0.4G-B, User Manual

Page: 224 / 300

Chapter 6 Description of Function Codes
-223-
Group A0: Second motor parameter setting
When the user needs to switch between two motors, the motor switch can be realized throu-
gh A0-00 or the No. 41 function of the multi-function digital DI terminal. In addition, the two
motors can be set with motor nameplate parameters, motor parameter tuning, VF control or
vector control control, and parameters related to VF control or vector control performance
can be set separately.
The three groups of function codes A1, A2, and A3 correspond to the motor parameters, VF
parameter settings, and vector control parameters of the second motor, respectively. All par-
ameters of group A, their content definitions and usage methods are consistent with the rele-
vant parameters of the first motor. Here The description will not be repeated, and the user
can refer to the description of the relevant parameters of the first motor.
Function
code
Name
Description
(setting range)
Factory
Default
Change
A0-00 Motor selection 0~1 1
★
1: Motor No. 1
2: Motor No. 2
When the current motor is No. 1, the A1~A3 function groups are not visible.
Function
code
Name
Description
(setting range)
Factory
Default
Change
A0-01 The second motor control mode 1~2 2
★
1: Open loop vector control (speed sensorless vector);
2: VF control.
Function
code
Name
Description
(setting range)
Factory
Default
Change
A0-02
Second motor acceleration and
deceleration time selection
1~2 2
★
0: Consistent with the first motor;
1: Acceleration and deceleration time 1, P0-23, P0-24;
2: Acceleration and deceleration time 2, P7-03, P7-04;
3: Acceleration and deceleration time 3, P7-05, P7-06;
4: Acceleration and deceleration time 4, P7-07, P7-08.
C
h
a
p
te
r
6