Vicruns 2S-0.4G-B, User Manual

Page: 181 / 300

Chapter 6 Description of Function Codes
-180-
Function
code
Name
Description
(setting range)
Factory
Default
Change
P7-29 LED running display 0000
～
0xPFPF H.441F
☆
This function code sets the parameters displayed by the LED when the inverter is running.
When the corresponding bit of this function code is set to 1, the monitoring parameter corres-
ponding to this bit is displayed. When multiple function codes are selected for display, they
can be switched by the keys on the operation panel.
Note:
When the function code is set to H.0000, the running frequency is displayed by default.
Setting example:
The hexadecimal value corresponding to each quantity to be displayed has been calculated.
As shown in Figure 5-7, the displayed quantities correspond to the set values one by one.
For example, to display only the bus voltage, set the corresponding 0004 to P7-29 (H.0004).
If multiple values need to be displayed, add the corresponding values one by one. For exa-
mple, to display the bus For voltage and output current, set 0004+0010=0014, and set 0014
to P7-29 (H.0014). The numbers of the addition result exceeding 10 are represented by A B
C D E F respectively, and the numbers represented are 10 11 12 13 14 15.
SHIFT
7 6 5 4 3 2 1 0
Bit00: Running frequency 0001
Bit01: Set frequency 0002
Bit02: Bus voltage 0004
Bit03: Output voltage 0008
Bit04: Output current 0010
Bit05: Output power 0020
Bit06: DI input status 0040
Bit07: DO output status 0080
15 14 13 12 11 10 9 8
Bit08: AI1 voltage 0100
Bit09: AI2 voltage 0200
Bit10: PID setting value 0400
Bit11: PID feedback value 0800
Bit12: Count value 1000
Bit13: Length value 2000
Bit14: Load speed display 4000
Bit15: PLC stage 8000
Figure 6-17. LED operation display bit map
C
h
a
p
te
r
6