Terumo 801763, Operator'S Manual, Page: 92 / 359

Central Control Monitor
4-30
To Reset Auto Dose Selection:
Make sure the cardioplegia pump is stopped or that the Manual button is selected.
Otherwise, the button text will be gray indicating that the Auto Dose value cannot be
reset.
1. Touch the
Reset
button.
• The value set in the Auto Dose Setup subtab for the selected Auto Dose appears
to the left of the Reset button.
• An additional dose can now be delivered and automatically stop the pump.
Aux Tab
The Aux tab has two subtabs: Timers and Messages.
Timers Subtab
Timers, other than Pump and Clamp, are controlled through the Timers subtab. To
change the start value of a count down timer, use the Timers subtab within the Setup
tab.
To start the timer:
1. Touch the black box.
•
The start time appears on the left side of the button.
To stop the timer:
1. Touch the black box again.
• The stop time appears on the right side of the timer display.
To resume the timer:
1. Touch the black box again.
• The timer continues counting.
• The resume time appears on the left side of the button.
TMR1
Reset
000:08
10:16
TMR1
Reset
000:21
10:16 10:17
Aux
Messages
TMR1
Reset
000:00
Timers
16:07:51