Terumo 801763, Operator'S Manual, Page: 158 / 359

Central Control Monitor
4-92
Assign Devices to Modules
The pumps and devices configured in the Perfusion Screen must be assigned to the
corresponding physical components on the system base.
All components must be connected to the system base before they can be assigned.
Select
Assign Devices to Modules
button and the configured pumps and devices
appear in the Devices list.
Touch the Show Unassigned Devices button to mark each unassigned device and
pump in the graphic display with a question mark.
Touch the
Hide Unassigned Devices
button to make the question marks disappear.
Assign Devices by selecting the device type from the list and then touch the Assign
Devices
button.
Arterial
L/min
START
CABG
Close
Devices:
Assign Devices to Modules
Configure Pumps
Configure Other Devices
Edit Safety Connections
Save As >
Configure Perfusion Screen > Assign Devices
Menu
CABG ROLLER
Vent
L/min
START
Sucker1
L/min
START
Sucker2
L/min
START
CPG
L/min
START
PCO2
K+
pH
mmHg
PO2
mmHg
mmol/L
Clamp
Reset Reset
000:00
Pump
Reset Reset
000:00
SO2
%
%
HCT
mmHg
C
C
Occluders
Pressure Sensors
Temperature Sensors
CDI 500
Hide Unassigned Devices>
Level Detectors
mmHg
Air Detctors
Large Roller Pumps
Assign Devices > Assign Devices >
C
Gas % O2 FiCO2
0 0
0
VO2
mL/min
C