Terumo 801763, Operator'S Manual, Page: 41 / 359

System Base
3-2
Base Components
Mains Power Cord
The AC (Mains) power cord connects the system to the wall electrical supply. When
the system is operating from the AC (Mains) power supply, the AC (Mains) power
status indicator LED located on the front panel is illuminated and steady.
Attach the system AC (Mains) power cord to an appropriate wall electrical supply as
indicated on the name plate label.
WARNING:
Check the AC (Mains) power cord and plug for damage prior to use.
Do not use the system if damage to the power cord or plug is found. Damage
may include worn or twisted cord insulation and loose, bent, or missing plug pins.
Additionally, damage may result from tightly wrapping the power cord around any
HLM fixture or pole.
CAUTION: Do not use extension cords to connect the system to AC (Mains)
power or to connect modules or accessories to the system. Use of extension
cords may compromise performance.
In some countries, regulations require potential compensation; in this case, connect
the cable from the potential compensation network to the ground equalization stud.
Circuit Breakers
There are 3 resettable circuit breakers on the system base.
Two resettable circuit breakers located near the AC (Mains) power cord protect the
system from excessive power consumption. The breakers are protected from liquid
by a clear plastic cover.
The system will switch from AC (Mains) to Battery Power in the event that one
or both circuit breakers protecting the system trips. To reset the circuit breakers,
depress the push button(s) until it clicks into place. Verify that the system returns to
AC (Mains) power.
CAUTION:
In the event that the breaker trips immediately after a reset,
DO NOT
attempt to reset again . The system will only operate from battery power until it
has been repaired. Call for service.
One resettable circuit breaker protects the auxiliary outlet from excessive AC (Mains)
power draw.
Mains Power Circuit Breakers
Mains Power Cord
Auxiliary Outlet
Ground Equalization Stud
Auxiliary Outlet Circuit Breaker