Terumo 801763, Operator'S Manual, Page: 294 / 359

Emergency Procedures
10-15
Flowmeter Module
Condition Status Display Control
Monitoring Monitoring LED on module displays status. None.
capability is lost Flow displayed on the centrifugal
unless flow was pump display if flowmeter was
placed on placed on the Centrifugal Pump
Centrifugal Pump icon.
icon
Setpoint displayed on pump
display if in Servo mode
Backflow Functional LED flashes red No control, alarm clears when
Alarm Dual tone alarm sounds if condition clears.
connected to a pump.
Message on pump display of
connected pump(s).
Occluder Module
Condition Status Display Control
Any Remains as set, LED on module displays status; No control;
will still respond % of max flow display lost. Remove tubing from occluder head
to primary pump and control flow manually with a
safety connections. tubing clamp.
Interface Module for CDI 100/101 or CDI 500
Condition Status Display Control
Monitoring Monitoring LED on module displays status Monitor data from the CDI 100/101
capability is lost or CDI 500 monitor.
Interface Module RS-232
Condition Status Display Control
Data Transfer Data Transfer N/A N/A
capability is lost
Timers
Condition Status Display Control
Monitoring Monitoring No display Use clocks in room or backup stop-
capability is lost watch to monitor times.
Electronic Gas Blender
Condition Status Display Control
Any Remains as set LED on module displays status. Control from knobs on front of the
Use tic marks on FiO
2
control system base.
knob for approximate FiO
2
.
Use external flowmeter
to monitor gas flow rate.
FiO
2
Alarm Functional LED flashes red No control, alarm clears when
condition clears.