Terumo 801763, Operator'S Manual, Page: 181 / 359

Roller Pumps
5-14
Controls and Displays
CAUTION
: Pump control panels and Central Control Monitor are intended for
hand and gloved hand operation only. Do not use any instruments on the pump
control panels or Central Control Monitor as this may damage the device.
Start/Stop Button
Press the
Start/Stop
button to activate and start the pump at a speed
of 0 RPM or a flow of 0.000 L/min in Continuous mode. Pressing
the
Start/Stop
button again stops the pump if it is running and also
deactivates it. If the pump is stopped and deactivated using the
Start/
Stop
button, it must be reactivated using the
Start/Stop
button for the
pump to be used again.
Select Button
Pressing the Select button will result in the following responses
depending on the pump state:
•
No response if pump is running or paused with no alerts or
alarms.
• Reset an active air alarm on a connected air bubble detection
system.
• Display pump menu if pump is stopped.
Manual Button
Pressing the Manual button will result in the following responses
depending on the pump state:
•
No response if pump is stopped or paused.
• No response if pump is in Continuous mode.
• Return to Continuous mode if in Pulse mode.
• Return to Continuous mode if in Servo mode.
• No response if in Master/Follower mode.
VENT
L/min
1/4
0.000
Default Forward Direction
Pump Name
Message Area
Tube Size or Flow Constant
Primary Display
Secondary Display
Mode Symbol
Bar Graph
Pump Speed
Control Knob