Terumo 801763, Operator'S Manual, Page: 31 / 359

System Overview
2-10
ARTERIAL 2010 RPM
L/min
4 . 5 0
Motor speed, flow rate, as well as safety, status, and error messages are displayed
on the centrifugal control unit control panel as well as on the Central Control Monitor.
Pump speed is displayed in RPMs on the pump as well as represented as an amber
colored bar graph.
There are 3 operating modes for a centrifugal pump:
• Continuous: pump operates at a constant speed set by the user.
• Pulse: available on the primary pump only; the pump speed alternates between a
peak speed and a baseline speed. The baseline speed can be adjusted through
the Central Control Monitor.
• Servo Control: pump speed is regulated to maintain a specific pressure or flow
rate. The pressure and flow rate setpoints can be adjusted through the Central
Control Monitor or from the pump speed control knob on the centrifugal control
unit.
The centrifugal system can be connected to safety and monitoring systems and other
pumps during configuration, followed by choosing centrifugal control unit responses.
Centrifugal control unit response choices are No Response, Stop, Coast and
Message Only. The choices allowed for a pump response vary depending on the type
of alert or alarm and the type of device connected to the pump.
When a connected device is in alert or alarm mode, a message will display on the
centrifugal control unit display.