Terumo 801763, Operator'S Manual, Page: 143 / 359

Central Control Monitor
4-78
Add a CDI™ 500
Choose CDI™ 500 from the Select Device Type list.
Select Device Name
The name CDI™ 500 is automatically chosen as only one monitor of this type is
allowed in a Perfusion Screen. This name is used in status and error messages
displayed by the system.
Choose
Next
button to continue.
Configure CDI 500 Data Display
Data Display
Up to 4 venous and 4 arterial parameters from the CDI™ 500 monitor can be
displayed on the Perfusion Screen at any one time.
Additional Venous parameters are °C, HCT, and HGB.
Additional Arterial parameters are °C, SO2, HCO3, and BE.
Additional Other parameters are K+.
Choose OK to accept the defaults and proceed.
Choose Cancel to cancel the addition of a CDI
TM
500.
Choose Modify to make changes to a list.
Modify >
VO2
Other:
pH
PO2
PCO2
K+
Arterial:
pH
PO2
PCO2
SO2
Venous:
Configure CDI 500 Data Display
Modify > Modify >
< Previous OK Cancel