Terumo 801763, Operator'S Manual, Page: 185 / 359

Roller Pumps
5-18
Select: Direction
The pump direction can be temporarily reversed from the default forward setting.
The pump direction will revert to its default forward direction when the Stop button is
pressed or when the pump is stopped in response to any alert or alarm messages or
another pump event.
WARNING: Use caution when roller pumping in the opposite direction of forward
flow as air may be drawn into the blood line.
To temporarily reverse the pump direction:
1. Press the
Select
button when SELECT: DIRECTION is highlighted.
2. Turn the pump speed control knob until the message “SELECT: REVERSE”
appears highlighted in reverse video in the message area.
3. Press
Select
button again, “SELECT: VERIFY REVERSE” is displayed in the
message area.
4. To confirm the temporary reversal, press the Select button again. Press Select
again to exit. The direction arrow on the pump display is shown in reverse video
if reverse was confirmed and the message “PUMPING REVERSE” is displayed.
To cancel the temporary reversal of pump direction, turn the knob until No
Change is highlighted and the menu displays “SELECT: EXIT”. Press
Select
to
cancel. Press
Select
once more to exit.
MENU
SELECT: REVERSE