Terumo 801763, Operator'S Manual, Page: 310 / 359

Technical Support
11-15
Nominal AC (Mains) Power Consumption
System
Configuration* 100 VAC 115 VAC 120 VAC 220 VAC 240 VAC
4-Pump System 9.5A – 11.5A 8.5A – 10A 8A – 10A 4.5A – 5A 4A – 5A
5-Pump System 10.5A – 13A 9.5A – 11.5A 9A – 11A 5A – 6A 4.5A – 5.5A
6-Pump System 11.5A – 14A 10.5A – 12.5A 10A – 12A 5.5A – 6.5A 5A – 6A
7-Pump System 13A – 15.5A 11.5A – 14A 11A – 13.5A 6A – 7A 5.5A – 6.5A
8-Pump System 14A – 17A 12A – 15A 12A – 15A 6.5A – 8A 6A – 7A
* Each System Configuration is defined as:
All large roller pumps, speed set to 250 RPM while using 1/2 inch (12,7mm) I.D. x 3/32 inch (2,4mm)
wall tubing, properly occluded and fluid temperature of 25°C;
All available module connections used with any combination of Flow, Temperature, Pressure, Level, Occluder,
Air Bubble Detector, and Serial Interface Modules with all assigned and activated;
1 Electronic Gas Blender Module, connected and activated;
1 Lamp connected and powered “ON”;
1 Central Control Monitor, connected and activated;
Peripheral equipment connected to the auxiliary outlet and activated.
This device requires a dedicated 20 Amp mains power source for the 100V - 120V
model or a dedicated 10 Amp AC (Mains) power source for the 220V - 240V model.